This routine sets the colour table of the image display device. It
can either be reset to a grey scale, or an RGB lookup table from a
3xN image can be used. The lookup table must have numbers between
0.0 and 1.0.
The colour table file to be used. The programme will look for
this file in the default directory and then in the standard
Figaro directories. If TABLE is 'grey' or 'gray' this is
trapped and a grey scale table is set up.
The name of the imaging device, normally got from a global
parameter which was set with the IDEV command.
FIGARO A general data reduction system Starlink User Note 86 Keith Shortridge, Horst Meyerdierks, Malcolm Currie, Martin Clayton, Jon Lockley, Anne Charles, Clive Davenhall, Mark Taylor, Tim Ash, Tim Wilkins, Dave Axon, John Palmer, Anthony Holloway and Vito Graffagnino 2004 February 17 E-mail:email@example.com